Danmarks Tekniske Universitet 30060946 Anker Engelundsvej 1 Kongens Lyngby 2800 Alexi Burns-Tang alexi@adm.dtu.dk www.dtu.dk Environmentally controlled evaporation, solvent processing and soft-etching system for 2D materials handling DTU Nanotech seeks a combined solvent and lithographic resist processing, thermal and RF sput-ter system, and fine-grained controllable plasma-based etching system housed completely within a sealed environment and permitting repeated transfer of oxygen and moisture sensitive samples be-tween multiple application of these different processing steps without exposure to the ambient en-vironment, permitting the handling and fabrication of 2D materials and van der Waals heterostruc-tures based prototype electronic and optical devices. These devices are to be free of ambient at-mosphere-induced contamination or degradation. In collaboration with Moorfield Ltd. Such a system has been specified, incorporating Moorfield’s Soft-Etch technology (developed with the world’s leading 2D materials research groups in Man-chester, UK) with plasma power setpoint control down to the 10mW range for a 30W plasma, and incorporating feedback from DTU Nanotech on system layout. 2000000.00 DTU. DTU Nanotech seeks a combined solvent and lithographic resist processing, thermal and RF sput-ter system, and fine-grained controllable plasma-based etching system housed completely within a sealed environment and permitting repeated transfer of oxygen and moisture sensitive samples be-tween multiple application of these different processing steps without exposure to the ambient en-vironment, permitting the handling and fabrication of 2D materials and van der Waals heterostruc-tures based prototype electronic and optical devices. These devices are to be free of ambient at-mosphere-induced contamination or degradation. In collaboration with Moorfield Ltd. Such a system has been specified, incorporating Moorfield’s Soft-Etch technology (developed with the world’s leading 2D materials research groups in Man-chester, UK) with plasma power setpoint control down to the 10mW range for a 30W plasma, and incorporating feedback from DTU Nanotech on system layout. Meeting the specific requirements stated above 100 0 Soft-etch technology is not available from other suppliers, and no other suppliers have tailored their thin film coating and processing solutions directly to end-to-end environmentally controlled glove box processing of 2D materials in collaboration with 2D materials researchers. 2018-03-23 ST Instruments B.V. (NL dist.) Moorfield Nanotechnology Ltd (UK manuf.) Knutsford, Cheshire United Kingdom WA16 8XJ https://moorfield.co.uk 2000000.00 2000000.00 Danish Complaints Board Nævnenes Hus, Toldboden 2 Viborg 8800 +45 35291000 klfu@erst.dk https://erhvervsstyrelsen.dk/klagenaevnet-for-udbud Complaint regarding the award of contract: Complaint regarding the award of contract must be submitted no later than 45 calendar days from the date after the Contracting Authority has published a contract award notice in the European Union Official Journal informing that the Contracting Authority has awarded the contract, cf. Law regarding Complaints board (in danish Klagenævnet for Udbud) § 7, section 2, no. 1. Complaint regarding the award of a contract under a framework agreement with a reopening of the competition: Complaint regarding the award of a contract under a framework agreement with a reopening of the competition must be submitted no later than 30 calendar days form the date after the Contracting Authority has notified the concerned Tenderers that a contract has been awarded, if the notification includes the grounds for the decision, cf. Law regarding Complaints board (in danish Klagenævnet for Udbud) § 7, section 2, no. 2. Complaint regarding the award of a framework agreement: Complaint regarding the award of a framework agreement must be submitted no later than 6 months from the date after the Contracting Authority have notified the concerned Candidates and Tenderers that award of contract has happened, cf. Law regarding the Complaints board (in Danish Klagenævnet for Udbud) § 7, section 2, no. 3. Complaint regarding direct award of contract: Complaint regarding the Contracting Authority’s award of contract without prior publication of a contract notice in the European Union Official Journal must be submitted no later than 30 calendar days from the date after a contract award notice has been published by the Contracting Authority in the European Union Official Journal and that contract award notice includes the grounds for the decision to award the contract directly, cf. Law regarding Complaints board (in danish Klagenævnet for Udbud) § 7, section 3. Compliant regarding public procurements below the EU threshold: Complaint regarding public procurements below the EU threshold must be submitted no later than 45 calendar days from the date after the Contracting Authority has notified the Tenderers about the award of contract if this notification includes the grounds for the decision; and no later than 6 months after the date where the Contracting Authority has notified the Candidates and Tenderers about that award of a framework agreement, if the notification includes the grounds for the decision, cf. Law regarding Complaints board (in danish Klagenævnet for Udbud) § 7, section 4, no. 1 and 2. Compliant regarding a decision on shortlisting on procurement below the EU threshold must be submitted no later than 20 calendar days from the date after the Contracting Authority has sent a notification to the concerned Candidates regarding who has been selected and this notification includes the grounds for the decision, cf. Law regarding Complaints board (in danish Klagenævnet for Udbud) § 7, section 5. Danish Competition and Consumer Authority Carl Jacobsensvej 35 Valby 2500 2018-04-02
See tender at TED: http://ted.europa.eu/udl?uri=TED:NOTICE:144711-2018:TEXT:EN:HTML